HP Scitex LX600 HP Designjet L65500 Printer and HP Scitex LX Printer Family - - Page 47

Insert the same syringe into the ink cartridge and fill it with 20 cc of ink for the color selected.

Get HP Scitex LX600 PDF manuals and user guides View all HP Scitex LX600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

● The pressure sensor gives a negative value. If the pressure is negative, there may be an error in the ink pressure PCA or in the ink pressure sensor cable. Check both by looking at the connection of the cable to the ISS PCA and at the pressure sensor PCA. Press OK to cancel the purge process. 2. If the pressure is positive, probably there is an air bubble inside the cartridge connector tube column. Prepare the syringe again, then press OK. 3. Insert the same syringe into the ink cartridge and fill it with 20 cc of ink for the color selected. 4. Check that there is no air in the syringe by hitting it a few times. If there is air, hold the syringe vertically with the needle up, so that the bubble of air rises to the top. Put a cloth around the needle, and press gently on the piston to remove the air from the syringe. ENWW 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
●
The pressure sensor gives a negative value. If the pressure is negative, there may be an error
in the ink pressure PCA or in the ink pressure sensor cable. Check both by looking at the
connection of the cable to the ISS PCA and at the pressure sensor PCA. Press
OK
to cancel
the purge process.
2.
If the pressure is positive, probably there is an air bubble inside the cartridge connector tube
column. Prepare the syringe again, then press
OK
.
3.
Insert the same syringe into the ink cartridge and fill it with 20 cc of ink for the color selected.
4.
Check that there is no air in the syringe by hitting it a few times. If there is air, hold the syringe
vertically with the needle up, so that the bubble of air rises to the top. Put a cloth around the needle,
and press gently on the piston to remove the air from the syringe.
ENWW
43