Icom ID-52A Advanced Manual english - Page 116
Symbol, <Editing a symbol with a 2 character symbol code>, <Selecting a preset symbol>
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
6 GPS OPERATION (ADVANCED) GPS items GPS Out (USB Port) (Default: OFF) [MENU] > GPS > GPS Set > GPS Out (USB Port) Selects whether or not to output the position information to the USB port. •• OFF: Does not send the position information to the USB port. •• ON: Send the position information to the USB port. GPS TX Mode (Default: OFF) [MENU] > GPS > GPS TX Mode Selects a GPS transmission mode to send GPS position data while in the DV mode. •• OFF: Does not transmit GPS data. •• D-PRS: Transmits GPS data in the D-PRS format. •• NMEA: Transmits GPS data in the NMEA format. Unproto Address (Default: API52,DSTAR*) [MENU] > GPS > GPS TX Mode > D-PRS > Unproto Address Displays an unproto address of up to 56 alphanumeric characters. NOTE: You should use the default address, and editing is not recommended. Symbol (Default: Person) [MENU] > GPS > GPS TX Mode > D-PRS > TX Format > Position > Symbol Selects the symbol that indicates your operating situation. The selected symbol channel's symbols (1 ~ 4) are transmitted with position data. 1. Select a symbol channel. LLDO NOT push [ENT]. 2. Push [QUICK]. 3. Select "Edit Symbol." 4. Push [QUICK]. 5. Select "Direct Input." 6. Rotate [DIAL] to edit the first digit. 7. Push D-pad() to select the second digit. 8. Rotate [DIAL] to edit the second digit. Selectable characters and symbols /, \, 0 to 9, A to Z A to Z, a to z, 0 to 9 9. After editing, push [ENT]. •• Sets the symbol into the symbol channel selected in step 1. 1. Select a symbol channel. LLDO NOT push [ENT]. 2. Push [QUICK]. 3. Select "Edit Symbol." 4. Select a symbol. •• Sets the symbol into the symbol channel selected in step 1. 6-31