Icom ID-52A Advanced Manual english - Page 169

10 SCAN OPERATION VFO Scan DDAbout a Program scan name When a Scan name is entered to a Program scan, the name is displayed in the Scan Type Select window. (p. 10-5) LLThe name is not displayed during a scan. LLTo enter the name, see page 10-7. When the Scan name is entered DDStoring the skip frequencies You can skip unnecessary frequencies during a scan. While a scan is paused and if you want to skip the frequency, you can store it into the Skip channels group S (00 ~ 99) as a Skip channel (PSKIP). The Scan Skip function speeds up a scan. 1. While a VFO scan is paused, hold down [MW] for 1 second. When the Scan name is not entered DDAbout a Program Link scan name When a Program Link scan name is entered, it is displayed in the Scan Type Select window. (p. 10-5) LLThe name is not displayed during a scan. LLTo enter the name, see page 10-8. When a Program Link name is entered •• The window, as shown above, is displayed. 2. Select "Adds to SKIP MR Group." •• Two short beeps sound. •• The frequency is stored in the Skip channels group. •• After storing, the scan resumes. LLIf there is no blank channel, an error beep sounds, and the frequency is not stored. TIP: Once a frequency is set as a Skip channel, the frequency is skipped until you clear the skip setting. To clear the skip setting, see page 10-11. LLThe skip setting is also cleared when the Memory channel set as a Skip channel is cleared. When a Program Link name is not entered 10-6