Icom ID-52A Advanced Manual english - Page 133
Transmitting the recorded voice audio, VOICE TX FUNCTION
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
7 VOICE TX FUNCTION Voice TX function DDTransmitting the recorded voice audio NOTE: BE SURE to insert a microSD card into the transceiver. [MENU] > VOICE > [MENU] > VOICE > 1. Push [MENU]. 2. Select "VOICE." 3. Select "" or "." •• : The recorded voice audio is transmitted only once. LLInformation •• While transmitting, the SD card icon blinks. •• When you select "," the transceiver repeatedly transmits the recorded voice audio for up to 10 minutes at the interval set in "Repeat Time." ([MENU] > VOICE > TX Set > Repeat Time) •• : The recorded voice audio is repeatedly transmitted. •• Any of the following action cancels the transmission. - Pushing [PTT] - Turning OFF the transceiver, then turning it ON again. - Pushing any key (except for [VOL] and [ ]) •• After the second transmission, the transmission continues pausing, if receiving a signal, even if "Busy Lockout" is set to "ON." ([MENU] > SET > Function > Busy Lockout) However, if the squelch is manually opened in the FM mode, the voice audio is repeatedly transmitted, according to the "Repeat Time" setting. •• You can select whether or not to output the TX voice audio from the speaker. ([MENU] > VOICE > TX Set > TX Monitor) Blinks Transmission is paused TIP: To transmit the recorded voice audio in the Quick Menu window, push [QUICK], then select "Voice TX." 7-3