Icom ID-52A Advanced Manual english - Page 172
Memory Scan, Scan Type
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
10 SCAN OPERATION Memory Scan NOTE: You must enter 2 or more Memory channels that are not set as Skip channels to start a Memory scan. 1. Push [MR] to enter the Memory mode. LLFor only the ID-52A, pushing [MR] each time selects the Memory and Weather Channel modes. 2. Hold down [SCAN] for 1 second. •• Opens the Scan Type Select window. 3. Select a scan type. Blinks •• The scan starts. •• The decimal point and " " blink. LLWhen receiving a signal, the S-meter displays the received signal strength. 4. Hold down [SCAN] for 1 second. •• Cancels the scan. LLPushing [CLR] also cancels the scan. DDScan Type •• ALL: Full scan •• BAND: Band scan •• MODE: MODE scan •• DUP: Duplex scan (Displayed only when Duplex is set) •• GROUP LINK: Group Link scan •• GROUP 00 ~ 99: Group scan •• TONE: Tone scan (For the Tone Squelch scanning) LLWhen 2 or more Memory channels that are not set as Skip channels are entered, the Memory scan is usable. LLThe channel set as a Skip channel (PSKIP or SKIP) is skipped during a scan. (p. 10-11) TIP: •• During a scan, rotate [DIAL] to change the scanning direction. •• During a scan, hold down [ ] to turn the Lock function ON or OFF. •• The scan continuously runs, even if you push [MENU] or [QUICK] during a scan. •• You can select a scan type by rotating [DIAL] while holding down [SCAN]. Release [SCAN] to start the scan. 10-9