Icom ID-52A Advanced Manual english - Page 167
About Scans, [DIAL] operation during a scan, Squelch setting for a scan, Tuning step for a VFO scan
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
10 SCAN OPERATION About Scans DD[DIAL] operation during a scan •• Rotate [DIAL] to change the scan direction during a scan. •• When the scan is paused, rotate [DIAL] to resume the scan. DDSquelch setting for a scan You can change the squelch level to suit your operating needs. Set the squelch level to open the squelch, according to the received signal strength. LLDuring a scan, rotate [DIAL] while holding down [SQL] to adjust the squelch level. The scan resumes after adjusting. Blinks DDOperating mode during a scan •• The VFO scan uses the selected operating mode. •• During a Memory mode scan, the operating mode entered into the channel is used. DDWhen a signal is received When a signal is received, the scan pauses for this set period of time. (p. 12-5) When a received signal disappears, the scan resumes for this set period of time. (p. 12-5) LLThese settings can be separately set to A band and B band. [MENU] > SET > Scan > Pause Timer [MENU] > SET > Scan > Resume Timer DDTuning step for a VFO scan The selected tuning step is applied to the scan. For a Program scan or Program Link scan, set the tuning step in the Program Scan Edge ranges (P-Scan Edge). DDScan Skip function The skip function speeds up scanning by not scanning those frequencies set as skip channels. LLThese settings can be separately set to A band and B band. In the VFO mode The frequencies that are set as "PSKIP" are skipped during a scan. (p. 10-6) In the Memory mode The frequencies that are set as skip channels "PSKIP" and "SKIP" are not scanned. (p. 10-11) LLYou must enter 2 or more Memory channels to start a memory scan. TIP: When "Program Skip" is set to OFF, you cannot use the Program Skip scan function. (p. 12-5) ([MENU] > SET > Scan > Program Skip) Blinks DDScan Stop Beep function The Scan Stop Beep function sounds a beep when a signal is received. This function can be turned ON or OFF on the MENU screen. (p. 12-29) [MENU] > SET > Sounds > Scan Stop Beep 10-4