Icom ID-52A Advanced Manual english - Page 80

5 D-STAR OPERATION (ADVANCED) Repeater list operation DDSkip setting for the DR scan You can set repeaters as scan skip repeaters. The selected repeaters are skipped for faster scanning. You can set the skip setting to all repeaters in the selected repeater group or individual repeaters. LLWhen a repeater is set as a skip repeater, its "USE (FROM)" setting is automatically set to "NO." In that case, the repeater cannot be selected in "FROM" (access repeater) on the DR screen. [MENU] > MEMORY > Repeater List 1. Push [MENU]. 2. Select "MEMORY" on the second page of the MENU screen. 3. Select "Repeater List." 4. Select a repeater group where the repeater you set the skip setting is listed. 1. On the REPEATER GROUP screen, select a repeater group, as described to the left. 2. Push [QUICK], then select "SKIP All ON" to skip the group's repeaters during the DR scan. LLTo cancel the skip settings in the group, select "SKIP All OFF." TIP: •• When you select "Repeater List" on the FROM SELECT screen, you can set the skip setting as described to the left. •• When "FROM" is selected on the DR screen, push [QUICK] to set the skip setting, as shown below. 5. Select the repeater to be skipped, and then push [QUICK]. 6. Select "SKIP." LLDisplays "SKIP" by the selected repeater. LLDisplays "SKIP" in the "FROM" field. LLSelect "SKIP" again to cancel the skip setting. LLSelect "SKIP All ON" to set the skip setting to all repeaters in the group. 5-39