Icom ID-52A Advanced Manual english - Page 190

12 SET MODE DV Set GPS Data Speed (Default: Slow) [MENU] > SET > DV Set > DV Fast Data > GPS Data Speed Sets the GPS data speed when the data is sent using the DV Fast Data function. •• Slow: Sends GPS data at slow speed (approximately 950 bps). •• Fast: Sends GPS data at fast speed (approximately 3480 bps). TX Delay (PTT) (Default: 2sec) [MENU] > SET > DV Set > DV Fast Data > TX Delay (PTT) Sets the time for when the transceiver returns to receive after sending DV data in the DV Fast Data mode using [PTT]. •• OFF: After releasing [PTT], the transceiver returns to receive. •• 1 ~ 10sec: A fter releasing [PTT], the transceiver sends data using the DV Fast Data mode for this set period. When the TX data is completely sent within this set period, the transceiver automatically returns to receive. NOTE: This function is usable only when "DV Data TX" is set to "PTT." Digital Monitor (Default: Auto) [MENU] > SET > DV Set > Digital Monitor Selects a receive mode when pushing [SQL] in the DV mode. •• Auto: Receives in the DV mode or the FM mode, depending on the received signal. •• Digital: Receives in the DV mode. •• Analog: Receives in the FM mode. Digital Repeater Set (Default: ON) [MENU] > SET > DV Set > Digital Repeater Set Turns the Digital Repeater Set function ON or OFF. When accessing a repeater that has a call sign that is different from the transceiver's setting, this function reads the repeater's transmit signal and automatically sets the repeater call sign. •• OFF: Turns OFF the function. •• ON: Automatically sets the repeater call sign. DV Auto Detect (Default: OFF) [MENU] > SET > DV Set > DV Auto Detect Turns the DV mode Automatic Detect function ON or OFF. When in the DV mode, if you receive a nondigital signal, this function automatically sets the operating mode to the FM mode. •• OFF: T urns the function OFF. The operating mode is fixed to the DV mode. •• ON: Automatically selects the FM mode for temporary operation. RX Record (RPT) (Default: ALL) [MENU] > SET > DV Set > RX Record (RPT) The transceiver can record the data of up to 50 individual calls. When the received signal includes a status message ("UR?" or "RPT?") that is sent back from the access repeater, you can record up to 50 messages, or only the last call, in the Received Call Record. •• ALL: Records up to 50 calls. •• Latest Only: Records only the last call. [RX>CS] Key (Default: Call Sign Capture) [MENU] > SET > DV Set > [RX>CS] Key Selects the [RX→CS] Call Sign Capture key operation when you hold down. •• Call Sign Capture: While holding down, the RX History is displayed. After releasing, the last received call station's call sign is set to "TO" (destination). •• RX>CS List: When you hold down for 1 second, the RX History is displayed. Rotate [DIAL] to select a call sign to set to "TO" (destination), and then push [ENT]. BK (Default: OFF) [MENU] > SET > DV Set > BK The Break-in (BK) function enables you to break into a conversation, where the two other stations are communicating with call sign squelch enabled. •• OFF: T urns OFF the function. •• ON: Turns ON the function. LLThe BK function is automatically turned OFF when the transceiver is turned OFF. 12-11