Icom ID-52A Advanced Manual english - Page 153

9 MEMORY OPERATION Selecting a Memory channel In the Memory mode, you can select the Memory channels by rotating [DIAL]. 1. Push [MR] to enter the Memory mode. Selecting a Call channel Call channels are used for quick recall of most often used operating frequencies. Factory default frequencies and operating modes are entered into the Call channels. Change these to suit your operating needs. 1. Hold down [CALL] for 1 second to enter the Call Channel mode. LLFor only the ID-52A, pushing [MR] each time selects the Memory and Weather Channel modes. 2. Rotate [DIAL]. •• Selects a Memory channel. LLBlank channels are not selected. LLTo select a Memory Group, push [QUICK], and then select "Group Select." LLThe Memory channels are commonly used for the A and B bands. On the B band, if you select a memory channel that is out of the selectable frequency range, " " is displayed, and the signal cannot be received. TIP: To sequentially select a channel in a different group 1. Push [QUICK]. 2. Select "Channel Select Group Range." 2. Rotate [DIAL]. •• Selects a Call channel. 3. Select "All Groups." 9-3