Icom ID-52A Advanced Manual english - Page 18
About the SD Card mode, USB Connect
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
2 USING a microSD CARD About the SD Card mode When "USB connect" is set to "SD Card Mode," and the transceiver is connected to the PC through a USB data cable, you can transfer the files between the micoSD card set in the transceiver and a PC. You can back up the setting data and recording data saved on the microSD card to a PC, and save the image data for the Share Pictures function and the firmware data to the microSD card without inserting or removing it. [MENU] > SET > Function > USB Connect 1. Connect the transceiver to a PC using a USB cable. 2. Push [MENU]. 3. Select "Function" in the "SET" menu. 4. Select "USB Connect." NOTE: Before connecting the transceiver in the SD Card mode to a PC with a USB cable, a microSD card must be inserted. LLIf the microSD card is not inserted, insert it with the transceiver turned OFF, and then reconnect the USB cable. TIP: In the SD Card mode, the transceiver works not as a transceiver but as a data storage device. It temporarily stops some functions as follows: •• Stops recording •• Pauses the GPS Logger function and the RX History Log function •• Disconnects a Bluetooth device •• Disables the Auto Power OFF function To exit the SD Card mode LLThis instruction manual is based on Windows 10. 1. Click " " in the task tray. 2. Click "Eject Device." 3. After "Safe to Remove Hardware" is displayed, remove the USB cable from the PC. 5. Select "SD Card Mode." •• The confirmation dialog is displayed. 6. Select "Yes." 2-9