Icom ID-52A Advanced Manual english - Page 179
Auto Repeater function, Off band indication, REPEATER AND DUPLEX OPERATIONS
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
11 REPEATER AND DUPLEX OPERATIONS Auto Repeater function When the operating frequency falls within the Repeater output frequency range, the Auto Repeater function automatically sets the Repeater settings (Duplex ON/OFF, Duplex direction, Tone encoder ON/ OFF). The Auto Repeater function uses the preset repeater tone frequency and frequency offset. NOTE for the USA version transceiver: When turned ON, the Auto Repeater function has priority over the manual duplex setting. If the transmit frequency changes after setting, the Auto Repeater function may have changed the duplex setting. [MENU] > SET > Function > Auto Repeater 1. Push [MENU]. 2. Select "Function" in the "SET" menu. Off band indication If the transmit frequency is out of the amateur band, the off band indication, "OFF BAND," is displayed when you push [PTT]. Check the frequency offset or duplex direction in this case. (p. 11-4) 3. Select "Auto Repeater." 4. Select the option to turn ON the Auto Repeater function. •• OFF: Turns OFF the function. •• ON (DUP): Turns ON only the duplex operation. (Default) •• ON (DUP, TONE): Turns ON the duplex operation and Tone encoder. LLTo exit the MENU screen, push [MENU]. Frequency range and offset direction Frequency range Shift direction 145.200 ~ 145.495 MHz "DUP-" is set 146.610 ~ 146.995 MHz "DUP-" is set 147.000 ~ 147.395 MHz "DUP+" is set 442.000 ~ 444.995 MHz "DUP+" is set 447.000 ~ 449.995 MHz "DUP-" is set 11-5