Icom ID-52A Advanced Manual english - Page 211
Bluetooth Set, Bluetooth, Auto Connect, Pairing/Connect, <<Pairing Reception>>, AF Output
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
12 SET MODE Bluetooth Set Bluetooth (Default: OFF) [MENU] > SET > Bluetooth Set > Bluetooth Turns the Bluetooth function ON or OFF. Auto Connect (Default: ON) [MENU] > SET > Bluetooth Set > Auto Connect Selects whether or not to automatically connect to the paired Bluetooth device when its power is turned ON. •• OFF: D oes not connect to the paired device. •• ON: Automatically connects to the last connected device. Pairing/Connect [MENU] > SET > Bluetooth Set > Pairing/Connect Searches for the Bluetooth device to connect, or display the paired Bluetooth devices in the list. LLSee page 13-3 for details. [MENU] > SET > Bluetooth Set > Enters the pairing reception mode. LLSee page 17-7 for details. AF Output (Default: Headset Only) [MENU] > SET > Bluetooth Set > Headset Set > AF Output Selects the AF Output device when a Bluetooth headset is connected. •• Headset Only: O utputs audio to only the connected Bluetooth headset. •• Headset & Speaker: Outputs audio to both the connected Bluetooth headset and the transceiver's speaker. Headset Function Select (Default: Normal) [MENU] > SET > Bluetooth Set > Headset Set > Headset Function Select Selects the PTT and microphone combination when both the Bluetooth headset and the transceiver microphone are used. •• Normal: Transmits the audio from the Bluetooth headset, or the transceiver microphone, whichever [PTT] is pushed. •• Microphone: Transmits the audio from the Bluetooth headset. Transmission is enabled by pushing either the [PTT] on the Bluetooth headset, or the transceiver microphone. The transceiver microphone is only used for the PTT control. •• PTT: Transmits the audio from the transceiver microphone. Transmission is enabled by pushing either the [PTT] on the Bluetooth headset, or the transceiver microphone. The Bluetooth headset is only used for the PTT control. LLThe Bluetooth headset operation for each option is listed below. Option TX control TX audio Normal Enabled Enabled Microphone Enabled Enabled Disabled PTT Enabled (A udio from the microphone is transmitted.) Auto Disconnect (Default: OFF) [MENU] > SET > Bluetooth Set > Headset Set > Auto Disconnect Sets the Disconnect Timer between 0 and 10 seconds, or OFF. If there is no audio output from the Bluetooth headset, and there is no key operation for this set period of time, the Synchronous Connection-Oriented (SCO) link* is automatically disconnected. LLThe SCO link is connected when the signal is received, a beep sounds, or there is a key operation. * A Bluetooth link for voice communication 12-32