Icom ID-52A Advanced Manual english - Page 73
Entering new information into the repeater list, Repeater List
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
5 D-STAR OPERATION (ADVANCED) Entering new information into the repeater list DDEntering new information into the repeater list Step 1. Selecting the repeater group [MENU] > MEMORY > Repeater List 1. Push [MENU]. 2. Select "MEMORY" on the second page of the MENU screen. 3. Select "Repeater List." Step 4. Entering the repeater sub name 1. Select "SUB NAME." 2. Enter a sub name of up to 8 characters. LLSee page iii on how to enter characters. 3. After entering, push [ENT]. Step 5. Entering the repeater call sign LLWhen Step 2. Selecting the communication type is set to "DV Simplex" or "FM Simplex," go to Step 7. Changing the repeater group. 1. Select "CALL SIGN." 2. Enter the repeater call sign of up to 8 characters, including spaces and the node letter. 4. Select a repeater group to add a repeater to. •• Displays the repeater list of the selected repeater group. 5. Push [QUICK]. 6. Select "Add." NOTE: BE SURE to add the repeater node letter in the 8th digit of the call sign, according to the frequency band shown below. Note that there are almost always different node letters between Japanese D-STAR repeaters and repeaters in other countries. Cross band operation between different nodes at the same repeater site can be made. •• 1200 MHz: A (B in Japan) •• 430 MHz: B (A in Japan) •• 144 MHz: C (no repeaters in Japan) 3. After entering, push [ENT]. •• The REPEATER LIST EDIT screen is displayed. Step 2. Selecting the communication type 1. Select "TYPE." 2. Select the communication type. •• DV Repeater: Repeater operation in the DV mode. •• DV Simplex: Simplex operation in the DV mode. •• FM Repeater: Repeater operation in the FM mode. •• FM Simplex: Simplex operation in the FM mode. Step 6. Entering the gateway repeater call sign LLThis item is displayed when Step 2. Selecting the communication type is set to "DV Repeater." LLThe 8th digit in the call sign entered in Step 5. Entering the repeater call sign is automatically set to "G" as the gateway port, so you can skip this setting and go to the next item. 1. Select "GW CALL SIGN." 2. Enter a gateway repeater call sign of up to 8 characters, including spaces. LLOnly a space or "G" can be entered in the 8th digit. Step 3. Entering the repeater name 1. Select "NAME." 2. Enter a name of up to 16 characters. LLSee page iii on how to enter characters. 3. After entering, push [ENT]. 3. After entering, push [ENT]. 5-32