Icom ID-52A Advanced Manual english - Page 49
“TO” (Destination) setting
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
5 D-STAR OPERATION (ADVANCED) "TO" (Destination) setting "CQCQCQ," the destination repeater, or station call sign must be set in "TO" when you make a DV mode call. You have 9 ways to set the destination. By rotating [DIAL] Rotate [DIAL] to select the repeater or Your Call Sign displayed on the DR screen. (This operation is disabled when "CQCQCQ" is set.) To make a Local Area CQ call Set "CQCQCQ" in "TO" (Destination). (p. 5-9) To make a Gateway CQ call Select a repeater from the Repeater List, if you want to make a Gateway call. (p. 5-9) TIP: After you receive the individual station or repeater's signal, the call sign can be captured by holding down the Call Sign Capture key ([RX→CS]), and you can quickly and easily reply to a call. To make a call to a specific station Select the station call sign in the Your Call Sign list. (p. 5-10) To make a call through a Reflector Select a reflector you want to call through. (p. 5-14) To select from RX History When you receive a call, repeater or caller station data is saved in RX History. Select the destination from the record. (p. 5-10) TIP: How to change the repeater group: When "Local CQ" or "Gateway CQ" is selected, you can change the repeater group. To change the repeater group on the DR screen, push [QUICK], then select "Group Select." To select from TX History When you make a call, the destination repeater or called station data is saved in TX History. Select the destination from the record. (p. 5-11) To directly enter the destination station call sign Directly enter the destination station's call sign. (p. 5-11) To directly enter the destination repeater call sign Directly enter the destination repeater's call sign. (p. 5-12) 5-8