Icom ID-52A Advanced Manual english - Page 241
Using the VOX function, Setting the VOX level, MIC Gain External, VOX Level
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
15 OTHER FUNCTIONS VOX function DDUsing the VOX function [MENU] > SET > Function > VOX > VOX 1. Push [MENU]. 2. Select "Function" in the "SET" menu. 3. Select "VOX." 4. Select "VOX." 5. Select "ON." 6. To exit the MENU screen, push [MENU]. DDSetting the VOX level NOTE: We recommend you set the Microphone Gain level to 3, before setting the VOX level. ([MENU] > SET > Function > MIC Gain (External)) [MENU] > SET > Function > VOX > VOX Level 1. Push [MENU]. 2. Select "Function" in the "SET" menu. 3. Select "VOX." 4. Select "VOX Level." 5. While speaking into the microphone, rotate [DIAL] to adjust the VOX level. •• When you connect the HS-94, HS-95, or HS-97 headset, "VOX" is displayed on the standby screen. NOTE: While receiving a signal, or sounding a beep, the transceiver does not switch to transmit by your voice. •• Displays "VOX" when the TX level audio is input. LLThe VOX level can be adjusted between 1 (minimum) and 10 (maximum), or turned OFF. (Default: 5) LLHigher values make the VOX function more sensitive to your voice. 6. To exit the MENU screen, push [MENU]. LLIf the S-meter does not display the output power level, and the transceiver does not transmit, adjust the VOX delay time. ([MENU] > SET > Function > VOX > VOX Delay) LLWhen the VOX function is ON, you can adjust the VOX level by rotating [DIAL] while transmitting. 15-11