Icom ID-52A Advanced Manual english - Page 71

5 D-STAR OPERATION (ADVANCED) Repeater list You can save repeater information for quick and simple communication in up to 2500 repeaters (repeater list) in up to 50 Groups. Data must be in the repeater list to use the DR function. You can add and edit repeater content and groups in the repeater list. You can enter 4 types of frequencies into the repeater list, as shown below: •• DV Repeater •• DV Simplex •• FM Repeater •• FM Simplex TIP: •• For easy operation, the repeater list is preloaded into your transceiver. However, if you do an All Reset, the CPU deletes all setting data, the Memory channels, and the repeater list. We recommend that you back up the memory data to a microSD card or save it to a PC using the CS-52 programming software. •• The repeater list can be downloaded from the Icom website. See "Updating the repeater list" that can be downloaded from the Icom website about how to update the repeater list using a microSD card. https://www.icomjapan.com/support/ DDRepeater list contents The following contents are included in the repeater list: •• TYPE: Communication type (p. 5-32) •• NAME: Repeater name (p. 5-32) •• SUB NAME: Repeater sub name (p. 5-32) •• CALL SIGN: Repeater call sign and port letter (p. 5-32) •• GW CALL SIGN: Gateway repeater's call sign and port "G" (p. 5-32) •• GROUP: Repeater group (p. 5-33) •• USE (FROM): access repeater use (p. 5-33) •• FREQUENCY: access repeater's frequency (p. 5-33) •• DUP: Duplex direction (p. 5-33) •• OFFSET FREQ: Frequency offset (p. 5-33) •• MODE: Operating mode (p. 5-34) •• TONE: Tone setting (p. 5-34) •• REPEATER TONE: Repeater tone (p. 5-34) •• POSITION: Position data accuracy level (p. 5-34) •• LATITUDE: Latitude of the repeater (p. 5-34) •• LONGITUDE: Longitude of the repeater (p. 5-35) •• UTC OFFSET: UTC Offset (p. 5-35) Example: "Hirano" repeater information 5-30