Icom ID-52A Advanced Manual english - Page 219
Headset Settings, AF Output, Headset Function Select, DAF Output DHeadset Function Select
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
13 Bluetooth® OPERATION Headset Settings These are settings when using a Bluetooth headset. 1. Push [MENU]. 2. Select "Bluetooth Set" in the "SET" menu. 3. Select "Headset Set." DDAF Output [MENU] > SET > Bluetooth Set > Headset Set > AF Output You can select the AF Output device. If "AF Output" is set to "Headset & Speaker," you can hear audio from both a connected Bluetooth headset and the transceiver's speaker. LLSee page 12-32 for details. TIP: When "AF Output" is set to "Headset Only," the following dialog is displayed if the Bluetooth connection is accidentally disconnected. DDHeadset Function Select You can select the PTT and microphone combination when either a Bluetooth headset or the transceiver microphone are used. LLSee page 12-32 for details. [MENU] > SET > Bluetooth Set > Headset Set > Headset Function Select •• Normal: Transmitting the voice from the Bluetooth headset while pressing [PTT] or the internal microphone's voice. •• Microphone: Using the Bluetooth headset as a microphone. LLThe audio from the internal microphone cannot be transmitted. LLYou can also transmit by pressing the Bluetooth headset's [PTT]. •• PTT: Using the Bluetooth headset as a PTT switch. LLThe audio from the internal microphone is transmitted. The audio from the Bluetooth headset cannot be transmitted. LLYou can also transmit by pressing the transceiver's [PTT]. The operation of the Bluetooth headset for each setting is shown in the table below. Setting Normal Microphone PTT Transmit operation Audio input ✔ ✔ ✔ ✔ ✔ (Use internal microphone) •• YES: The audio is output from the transceiver's speaker. •• NO: The transceiver's volume level is automatically set to 0, and the audio is not output from the transceiver's speaker. 13-4