Icom ID-52A Advanced Manual english - Page 88

6 GPS OPERATION (ADVANCED) Before starting GPS operation NOTE: Before using the GPS function, read "IMPORTANT NOTES" about the GPS receiver in the Basic manual. The transceiver has a built-in internal GPS receiver. The GPS receiver's position data can be received in any mode. NOTE: Transmit or receive position data that can be transmitted in only the DV mode. DDConfirming the GPS signal receiving Confirm the GPS receiver is receiving satellite signals. The GPS icon blinks when searching for satellites The GPS icon stops blinking when the minimum number of satellites needed is found. LLInformation •• It may take only a few seconds to receive, or it may take a few minutes, depending on your operating environment. If you have difficulties receiving, we recommend that you try a different position. •• When "GPS Select" is set to "Manual," the icon is not displayed. ([MENU] > GPS > GPS Set > GPS Select) NOTE: Continuously using the Internal GPS mode causes the transceiver's battery to be exhausted quickly. Turn ON the Power Save mode if needed. See page 6-30 for details. ([MENU] > GPS > GPS Set > GPS Option > Power Save) TIP: To prolong the battery life in the GPS mode Manually update your location with the received GPS data. 1. Set "GPS Select" to "ON," and receive your position from the internal GPS receiver. ([MENU] > GPS > GPS Set > GPS Select) 2. Open the MANUAL POSITION screen, and then push [QUICK]. ([MENU] > GPS > GPS Set> Manual Position) 3. Select "Capture From GPS." •• Your current position is now memorized and displayed on the MANUAL POSITION screen. 4. Set "GPS Select" to "Manual." ([MENU] > GPS > GPS Set > GPS Select) 6-3