Icom ID-52A Advanced Manual english - Page 185
Program Link, Default settings of the Program Link, DUP Check During MR Scan
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
12 SET MODE Scan Program Link [MENU] > SET > Scan > Program Link Sets the link function for two or more Program Scan Edge ranges to be sequentially scanned during a Program Link Scan. The link function scans all frequencies in the scan range. Default settings of the Program Link: Program Link 0: Edit Name 01:144.000−148.000 Delete 1: 02:430.000−450.000 ... Blank Delete 9: Program Link number (0 to 9) Program Scan Edge range LLThe default setting may differ, depending on the transceiver version. LLWhen only one Program Scan Edge range is entered, or there is no Programmed Scan Edge is left, "Add" is not displayed after pushing [QUICK]. DUP Check During MR Scan (Default: OFF) [MENU] > SET > Scan > DUP Check During MR Scan During a Memory scan, selects whether or not to scan the offset frequency if Duplex is set on the channel. •• OFF: The offset frequency is not scanned. •• ON: The offset frequency is also scanned. 12-6