Icom ID-52A Advanced Manual english - Page 154
Entering Memory channel contents, Entering into a selected channel
View all Icom ID-52A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
9 MEMORY OPERATION Entering Memory channel contents After selecting a frequency in the VFO mode, you can enter it into a selected channel or an automatically selected blank channel. DDEntering into a selected channel Example: E ntering 146.030 MHz/FM mode into Channel 11 in Group 01. 1. Push [VFO/MHz] to enter the VFO mode. 2. Push [MODE] to enter the FM mode. 3. Rotate [DIAL] to set a frequency to 146.030 MHz. 10. Push [ENT]. •• The confirmation dialog is displayed. 11. Select "YES." 4. Hold down [MW] for 1 second. •• A short and a long beep sound. 5. Select "Write to New CH." 6. Push [QUICK]. 7. Select "Group Select." 8. Select Group "01." •• Beeps sound and the Memory contents are briefly displayed, then returns to the VFO mode. TIP: In step 7, you can select the following options. •• NAME: Displays the Memory name edit screen. (p. 9-11) •• SKIP: Displays the SKIP setting items. •• Group Select: Displays the GROUP SELECT screen. •• : Enters into the selected Memory channel. •• : Inserts a Memory channel above the selected channel. 9. Rotate [DIAL] to select Channel "11." 9-4