Icom ID-52A Advanced Manual english - Page 43

Section 5 D-STAR OPERATION (ADVANCED) Data communication 5-27 DD Connection 5-27 DD Data communication application setting 5-27 DD Sending data 5-27 DD DV Fast Data function 5-28 About the display type 5-28 Digital squelch functions 5-29 DD The Digital Call Sign squelch setting 5-29 DD The Digital Code Squelch setting 5-29 Repeater list 5-30 DD Repeater list contents 5-30 Entering new information into the repeater list 5-31 DD Required items for the communication cases 5-31 DD Entering new information into the repeater list 5-32 Repeater list operation 5-36 DD Editing repeater data 5-36 DD Deleting repeater data 5-36 DD Rearranging the display order of the repeaters 5-37 DD Adding new repeater information from RX History 5-38 DD Skip setting for the DR scan 5-39 DD Entering or editing a repeater group name 5-40 Your Call Sign 5-41 DD Entering Your Call Sign 5-41 DD Deleting Your Call Sign 5-42 DD Rearranging the display order of Your Call Signs 5-43 Are your settings correct 5-44 IMPORTANT! •• The repeater list, described in this manual, may differ from your transceiver's preloaded contents. •• Although Japanese repeaters are used in the setting examples, the Japanese repeater node (port) letters are different from other country's. BE SURE to add the repeater node letter in the 8th digit of the call sign, according to the frequency band shown below. 1200 MHz: A (B in Japan) 430 MHz: B (A in Japan) 144 MHz: C (no repeaters in Japan) To begin the Digital mode communication using other than the D-STAR Repeater (DR) function To begin Digital mode communication using other than the DR function, you can use the VFO mode, Memory mode, or Call Channel mode. This manual description focuses on the DR function operation, which can be easily set up. If you want to use other than the DR function, see the procedures as described to the right, or select the repeater in a Memory channel. For a Local area call or Gateway call: 1. Set the access repeater's frequency. (p. 11-2) 2. Set the Duplex direction and frequency offset. (p. 11-4) 3. Set the call signs (UR/R1/R2). (p. 12-8) For a Simplex call: 1. Set the operating frequency. 2. Set the call signs (UR/R1/R2). (p. 12-8) 5-2