Icom ID-52A Advanced Manual english - Page 75

5 D-STAR OPERATION (ADVANCED) Entering new information into the repeater list DDEntering new information into the repeater list Step 12. Setting the FM mode LLWhen Step 2. Selecting the communication type is set to "DV Repeater" or "DV Simplex," this item is not displayed. 1. Select "MODE." 2. Select "FM" or "FM-N." Step 15. Selecting the position data accuracy level LLWhen the Near Repeater Search function is not used, or the distance between your location and a repeater is not needed, select "OFF," and go to Step 18. Setting the UTC offset. 1. Select "POSITION." 2. Select the position data accuracy level. Step 13. Setting the tone LLWhen Step 2. Selecting the communication type is set to "DV Repeater" or "DV Simplex," this item is not displayed. 1. Select "TONE." 2. Select an option. •• OFF: Turn OFF the Tone function. •• TONE: Select when the repeater requires an access tone. •• TSQL: Select when you want to use the tone squelch in simplex operation. Step 14. Selecting the repeater tone frequency LLWhen Step 2. Selecting the communication type is set to "DV Repeater" or "DV Simplex," this item is not displayed. LLThis setting is required when Step 13. Setting the tone is set to "TONE" or "TSQL." 1. Select "REPEATER TONE." 2. Rotate [DIAL] to select the repeater tone frequency, and then push [ENT]. •• None: Select when the repeater has no position data. •• Approximate: S elect when the entered position data is approximate. •• Exact: Select when the entered position data is exactly correct. Step 16. Entering the latitude LLThis item is displayed only when Step 15. Selecting the position data accuracy level is set to "Approximate" or "Exact." 1. Select "LATITUDE." 2. Rotate [DIAL] to enter the latitude. LLPush D-pad() to move the cursor. LLTo enter a north latitude, select "N," and to enter a south latitude, select "S." 3. After entering, push [ENT]. 5-34