Icom ID-52A Advanced Manual english - Page 220

13 Bluetooth® OPERATION Headset Settings DDAuto Disconnect [MENU] > SET > Bluetooth Set > Headset Set > Auto Disconnect You can set the disconnect timer between 0 and 10 seconds or OFF. If there is no audio signal to the Bluetooth headset, or no operation is performed for a set period of time, the receiver automatically disconnects the Synchronous Connection-Oriented (SCO) link. LLWhen a signal is received, or an operation is performed while the SCO link is disconnected, the receiver will automatically reconnect the SCO link again. LLSee page 12-32 for details. DDRX Priority Setting (LE Device) [MENU] > SET > Bluetooth Set > Headset Set > RX Priority Setting (LE Device) You can select the communication priority for the DV Fast Data and receive audio, when connecting an iOS device (Bluetooth LE (Low Energy)) and a Bluetooth headset. The Bluetooth LE communication cannot be simultaneously used for both DV Fast Data and Headset audio. LLWhen connecting to a SPP (Serial Port Profile) device such as data device or PC, the Bluetooth devise functions according to the "Serialport Function" (p. 12-34) setting. LLSee page 12-33 for details. DDVOX function The Voice Operated eXchange (VOX) function toggles the transceiver between transmit and receive by your voice. This function provides hands-free operation. You can use the VOX function with the optional VS-3 or a third party's Bluetooth headset. Depending on the headset, the VOX function may be disabled because of the differences in microphones. NOTE: •• If the transceiver does not connect to a Bluetooth headset, you cannot use the VOX function through Bluetooth, even if "VOX" is set to ON. BE SURE to check the Bluetooth connection between the transceiver and the headset before using the VOX function. •• This setting is used for when using the Bluetooth microphone. See page 15-10 for using the external microphone. LLSee page 12-33 for details on the setting items and their options. [MENU] > SET > Bluetooth Set > Headset Set > VOX VOX screen You can turn the VOX function ON or OFF. VOX Level screen You can set the VOX gain level. Higher values make the VOX function more sensitive to your voice. VOX Delay screen You can set the VOX Delay. The VOX Delay is the amount of time the transmitter stays ON after you stop speaking, before the VOX switches to receive. VOX Time-Out Timer screen You can set the VOX Time-Out Timer to prevent an accidental prolonged transmission. To disable the function, set to "OFF." 13-5