Icom ID-52A Advanced Manual english - Page 54

5 D-STAR OPERATION (ADVANCED) REPEATER DETAIL screen Depending on the content, such as position data or UTC offset, the distance between your location and the repeater, or the repeater time can be displayed on the REPEATER DETAIL screen. The detail screen can also be entered from the FROM SELECT screen. Example: D isplaying the "Hirano/Icom" repeater detail screen 1. Hold down [DR] for 1 second to display the DR screen. 2. Push D-pad() to select "TO" then push [ENT]. The REPEATER DETAIL screen Repeater frequency Repeater name Sub name Call sign Group number Direction from your position* Repeater type Repeater time Duplex setting Distance from your position 3. Select "Gateway CQ." 4. Select "13: Japan." * When the "POSITION" setting (p. 5-34) is set to "Approximate" on the repeater list, the direction data is not displayed if the distance to the repeater is less than 5 kilometers. LLIf there is no position data, the distance and direction from your position are not displayed. See page 6-3 to confirm your position. LLWhen selecting an FM repeater, either of "FM" or "FM-N" and the tone setting are displayed. TIP: You can display the REPEATER DETAIL screen when the DR screen is displayed. When you set the repeater as shown below, push [QUICK], then select "Repeater Detail." 5. Select "Hirano/Icom." LLDO NOT push [ENT]. 6. Push [QUICK]. 7. Select "Detail." •• The REPEATER DETAIL screen is displayed. 8. Push [ENT]. •• Returns to the previous screen. 5-13