JVC GY-DV300U 108 pg. instruction manual on the GY-DV300U Pro-DV Camcorder (PD - Page 102
In Case of Difficulty
View all JVC GY-DV300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
TROUBLESHOOTING In Case of Difficulty Symptoms Troubles, Checks and Remedial Actions Power cannot be switched ON. • Is power supply connected properly? • Is battery pack charged? • Was the power turned ON immediately after being turned OFF? Wait at least 5 seconds before turning the power ON again once it has been turned OFF. Operation buttons on the GY-DV300 fail to work. • Is the cassette cover open? The GY-DV300 remains inoperative as long as the cassette door is open. • Is a tape inserted? Recording is not possible. • Is the switch on cassette set to "REC"? If it is set to "SAVE", set it to REC. • Is the MODE switch set to "CAM-A" or "CAM-B"? If set to "VTR", shooting of camera is not possible. The camera image does not appear on the LCD screen or in the viewfinder. • Is the MODE switch set to "CAM-A" or "CAM-B"? If set to "VTR", the camera image is not output. Image on the LCD screen or the viewfinder screen looks dark or unclear. • Adjust the brightness of the LCD screen or viewfinder screen. • Check if the ND filter switch is set to "ON". • Is the iris closed? • Is the shutter speed setting too fast? Manual adjustments, such as adjustment of shutter speed, gain, iris, etc. not possible. • Is the shooting mode the AUTO mode? • Is AE mode ON? To enable manual adjustments, set the AE item on the OPERATION menu screen to OFF. Camera-shake compensation does not work. • Is the OIS item on the OPERATION menu screen set to OFF? Set to ON to activate the camera-shake compensation function. The sound from the built-in microphone is not input. • Is the MIC1 INPUT SEL item on the SYSTEM [1/2] menu screen set to XLR? To use the built-in microphone, set to INT. The sound from the microphone connected to the MIC 1 input connector is not input. • Is the MIC1 INPUT SEL item on the SYSTEM [1/2] menu screen set to INT? To use the microphone connected to the MIC 1 input connector, set to XLR. Noise interferes with playback video. • Video head may be clogged with dirt. Clean head with the special head cleaning tape. ( See page 10.) Noise appears when playing back • When a tape recorded on another unit is played back or used a tape recorded on another unit. for recording, this phenomenon may occur due to tracking errors. The transient section between scenes recorded on other units and those recorded on the GY-DV300 may appear disturbed. Sound is not heard from the built- • Sound is not output from the built-in speaker in the recording in speaker in the recording mode. mode. The built-in speaker outputs the playback sound. No sound during playback. • Is the PB AUDIO SEL item on the VTR menu screen set to CH3/4? To output the sound recorded during shooting, set to CH1/CH2. 102