JVC GY-DV300U 108 pg. instruction manual on the GY-DV300U Pro-DV Camcorder (PD - Page 49
Audio Input Signal Selection
View all JVC GY-DV300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
SETTINGS BEFORE SHOOTING Audio Input Signal Selection The GY-DV300 is provided with three sources for audio input (i.e., built-in microphone and input connectors MIC 1 and MIC 2 for external microphones). Two channels of sound can be recorded on the tape in digital PCM format. Select for each channel (CH1 and CH2) which sound should be recorded on the channel. The sound of each of the input sources is monaural. MIC 1 Built-in microphone input connector Select whether the built-in microphone or a microphone connected to the MIC 1 input connector should be used. MIC 2 input connector The built-in microphone and a microphone connected to the MIC 1 input connector cannot be used at the same time. When using the GY-DV300 with the built-in microphone or a microphone connected to the MIC 1 input connector, select which one to use by setting the MIC1 INPUT SEL item on the SYSTEM [1/2] menu screen. SYSTEM [1/2] menu screen SY STEM [ 1 / 2 ] M I C1 I NPUT SE L I NT WI N D CUT M I C1 OF F W I N D C UT M I C 2 OF F +48V M IC1 OF F +48V M IC2 OF F AUD I O MOD E 4 8K REC MODE SP LONG PAUSE T I ME 3 0 M I N N E X T P AG E PAGE BACK Set to INT to use the built-in microphone. Set to MIC 1 to use the microphone connected to the XLR input connector. POWER OFF ON MODE CAM-B CAM-A VTR GAIN SHUTTER PUSH BAR AW MENU FWD REV CH-1 AUDIO CH-2 MIC1 MIC2 MONITOR CH-1 CH-2 MIX CH-1 AUDIO CH-2 MIC1 MIC2 AUDIO input signal selector switch Select the input signal to the CH-1, CH-2 audio channels The audio signal input to the CH-1, CH-2 audio channels is selected with the AUDIO input selector switch. The input can be set separately for each channel. Setting Input Signal MIC 1 The microphone sound from the built-in microphone or a microphone connected to the MIC 1 input connector. (Make the selection with the MIC1 INPUT SEL item on the SYSTEM [1/2] menu screen.) MIC 2 The microphone sound from a microphone connected to the MIC 2 input connector. The same sound can be input to both the CH-1 and CH-2 channels. 49