Kodak ESP9 User Manual - Page 105

Scanned image blank, Network troubleshooting, Computer unable to detect the All-in-One printer

Page 105 highlights

Chapter 10 Probable cause 5 The memory card you are scanning to does not have enough free space to save the scanned photo. Corrective action Remove some files from the memory card to free up some space. Scanned image blank Probable Cause Your original is not placed correctly on the scanner glass. Corrective Action Place your original face down in the proper corner of the scanner glass. Network troubleshooting Wired network troubleshooting Computer unable to detect the All-in-One printer Probable Cause 1 Cables are not connected properly. Corrective Action Check the following cables to ensure they are properly connected. • Cables between the hub or router and your computer • Cables between the All-in-One printer and the hub or router • Cables to and from your modem or printer Internet connection (if applicable) Probable Cause 2 Your Local Area Network card (LAN card) is not set up properly. Corrective Action Verify the setup of your LAN card. To check your LAN card (Windows) 1 Open the Control Panel. 2 Double-click System. 3 In the System Properties dialog box, click the Hardware tab. 4 Click Device Manager. Kodak ESP 9 Printer User Guide 97

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141

Chapter 10
Kodak ESP 9 Printer User Guide
97
Probable cause 5
The memory card you are scanning to does not have enough free space to save the
scanned photo.
Corrective action
Remove some files from the memory card to free up some space.
Scanned image blank
Probable Cause
Your original is not placed correctly on the scanner glass.
Corrective Action
Place your original face down in the proper corner of the scanner glass.
Network troubleshooting
Wired network troubleshooting
Computer unable to detect the All-in-One printer
Probable Cause 1
Cables are not connected properly.
Corrective Action
Check the following cables to ensure they are properly connected.
Cables between the hub or router and your computer
Cables between the All-in-One printer and the hub or router
Cables to and from your modem or printer Internet connection (if applicable)
Probable Cause 2
Your Local Area Network card (LAN card) is not set up properly.
Corrective Action
Verify the setup of your LAN card.
To check your LAN card (Windows)
1
Open the Control Panel.
2
Double-click
System
.
3
In the
System Properties
dialog box, click the Hardware tab.
4
Click
Device Manager
.