Konica Minolta Fujitsu fi-6800 Operating Guide - Page 233

Glossary G Gamma A unit which indicates the changes in the brightness of an image. It is expressed as a function of the electric input power to devices (e.g. scanner, display) and the brightness of the image. If the gamma rate is larger than 1, the brightness of an image increases and vice versa. Normally, the gamma rate is set to 1 when reproducing the same brightness as the original. Grayscale A method which expresses the gradation (density) from black to white in 256 levels. Suitable for scanning images such as photographs. H Halftone processing Reproduces the color density in black & white by using dot patterns. This method is effective for scanning images such as photographs in black & white. I Image processing Refers to processing and outputting the scanned image via specified scan parameters. iMFF (Intelligent MultiFeed Function) A function that excludes certain patterns of overlapping of documents that is detected as multifeed, by letting the scanner memorize the overlap pattern. For instance, when there is paper of the same size attached to a designated location on the page, the scanner memorizes the location of the attachment and can be configured not to detect multifeeds for that location. Imprinter A printer that prints character strings such as alphabets and numbers on the front or the back of the document. It can be used to manage scanned images by adding names, date or serial numbers. Interface The connection that allows communication between the computer and the scanner. TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing Consumables Troubleshooting Operational Settings Appendix Glossary 233