Konica Minolta bizhub 25 bizhub 25 Administrator Guide - Page 101
Setting the Workgroup Name, Open the TCP/IP settings screen., Press [Workgroup]., and press [Enter].
View all Konica Minolta bizhub 25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Setting the Workgroup Name Note ••The domain name cannot be used as the workgroup name. ••If there is no workgroup on the network, create a new workgroup. ••Contact your administrator to create a new workgroup. 11 Open the TCP/IP settings screen. (See page 2-46.) 22 Press [Workgroup]. 33 Enter the workgroup name, and press [Enter]. You cannot enter "*" at the start of a name. 2-48 Specifying the Network Settings
2-48
Specifying the Network Settings
±
Setting the Workgroup Name
Note
The domain name cannot be used as the workgroup name.
•
If there is no workgroup on the network, create a new workgroup.
•
Contact your administrator to create a new workgroup.
•
Open the TCP/IP settings screen.
1
(See page 2-46.)
Press [Workgroup].
2
Enter the workgroup name, and press [Enter].
3
You cannot enter “*” at the start of a name.