Konica Minolta bizhub 25 bizhub 25 Administrator Guide - Page 151
F-Code Polling Rx error. Remote, Polling Rx error. Polling document
View all Konica Minolta bizhub 25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Error code Error message Countermeasure T.4.2 The remote machine could not receive document. The transmitted pages were received but some of them might have had poor image quality. Check the image quality of the document received on the other party's machine. T.5.1 T.5.2 T.5.3 Confirm the remote fax. Confirm the remote fax. Cannot send at minimum speed. Transmit the document again. If this error continues to occur, contact your local technical representative. T.8.1 T.8.10 Cannot send a fax in SuperG3 mode. T.8.11 R.1.1 Confirm the remote fax. The sending party may have made an operational mistake. If you know who the sending party is, ask them to transmit the document again. R.1.2 Confirm the remote fax. If you know who the sending party is, ask them to transmit the document again. If this error continues to occur, contact your local technical representative. Reception error. Remote fax is not compatible. Reception could not be performed because the security function is set. For details on disabling the settings to receive documents, refer to "Closed Communication". (See page 2-10.) Reception error. No passcode stored Reception could not be performed because the on remote fax. security function is set. For details on disabling the settings to receive documents, refer to "Closed Communication". (See page 2-10.) Reception error. Passcode does not match. Reception could not be performed because the security function is set. For details on disabling the settings to receive documents, refer to "Closed Communication" (See page 2-10.) Polling Rx error. Polling document Check the settings on the other party's machine. is not stored on remote fax. Confirm the remote fax. Out of paper reception is full. A problem such as the machine running out of paper or a paper jam has cause the maximum number of documents that can be stored without printing to be reached. Once the problem such as the machine running out of paper or a paper jam has been resolved, the stored documents will be printed and the machine will be able to receive documents again. F-Code Polling Rx error. Remote machine does not have F-Code polling function. Check the settings on the other party's machine. Confirm the remote fax. If you know who the sending party is, ask them to transmit the document again. If this error continues to occur, contact your local technical representative. 4-4 Error Messages