Konica Minolta bizhub 25 bizhub 25 Administrator Guide - Page 98

Specifying the TCP/IP Settings - configuration

Get Konica Minolta bizhub 25 PDF manuals and user guides View all Konica Minolta bizhub 25 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 98 highlights

Function Description Settings Reference page Scan to Print You can delete the printers Clear registered in the Scan to Print Monitor from the machine. Use this function when the computer using the Scan to Print 1 Monitor cannot access the machine. Management Initiliaze You can initialize the service Service Setting settings specified in the machine 2 policy settings of Message Board from the machine. Use this function when you cannot access Message Board. Network Connection You can set the communication speed for the LAN that is connected. Auto 100Mbps - Full Duplex 100Mbps - Half Duplex 10Mbps - Full Duplex 10Mbps - Half Duplex Note Underlined values are the default settings specified at the time of shipment. Specifying the TCP/IP Settings You can set the settings for using the machine on a network. The following items can be set. Item Host Name Workgroup DNS Server Addresses DNS Suffix Obtain IP address (DHCP) IP Address Subnet Mask Default Gateway WINS Server Address Description Enter the host name of the machine. The default setting is the MAC address, and up to 15 characters can be entered. Enter the workgroup name of the network the machine is connected to. The default setting is "WORKGROUP", and up to 15 characters can be entered. When using a DNS server, enter the primary DNS server address and the secondary DNS server address. To perform name resolution using only a host name, register the DNS suffix. Enables the setting for automatically obtaining IP addresses using a DHCP (Dynamic Host Configuration Protocol) server. To automatically obtain IP addresses, select [ON]. Otherwise, select [OFF]. Enter the IP address. Note If DHCP is enabled, you cannot display or edit the IP address. Enter the subnet mask. Note If DHCP is enabled, you cannot edit the subnet mask. If you are using a gateway, enter the gateway address. If you are using a WINS server, enter the WINS server address. Specifying the Network Settings 2-45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
Specifying the Network Settings
2-45
1
2
Management
Function
Description
Settings
Reference page
Scan to Print
Clear
You can delete the printers
registered in the Scan to Print
Monitor from the machine.
Use this function when the
computer using the Scan to Print
Monitor cannot access the machine.
Initiliaze
Service Setting
You can initialize the service
settings specified in the machine
policy settings of Message Board
from the machine. Use this function
when you cannot access Message
Board.
Network
Connection
You can set the communication
speed for the LAN that is
connected.
Auto
100Mbps - Full Duplex
100Mbps - Half Duplex
10Mbps - Full Duplex
10Mbps - Half Duplex
Note
Underlined values are the default settings specified at the time of shipment.
Specifying the TCP/IP Settings
You can set the settings for using the machine on a network. The following items can be
set.
Item
Description
Host Name
Enter the host name of the machine.
The default setting is the MAC address, and up to 15 characters
can be entered.
Workgroup
Enter the workgroup name of the network the machine is
connected to.
The default setting is “WORKGROUP”, and up to 15 characters
can be entered.
DNS Server Addresses
When using a DNS server, enter the primary DNS server
address and the secondary DNS server address.
DNS Suffix
To perform name resolution using only a host name, register the
DNS suffix.
Obtain IP address (DHCP)
Enables the setting for automatically obtaining IP addresses
using a DHCP (Dynamic Host Configuration Protocol) server. To
automatically obtain IP addresses, select [ON]. Otherwise, select
[OFF].
IP Address
Enter the IP address.
Note
If DHCP is enabled, you cannot display or edit the IP address.
Subnet Mask
Enter the subnet mask.
Note
If DHCP is enabled, you cannot edit the subnet mask.
Default Gateway
If you are using a gateway, enter the gateway address.
WINS Server Address
If you are using a WINS server, enter the WINS server address.