Konica Minolta bizhub 25 bizhub 25 Administrator Guide - Page 109

Registering LDAP Servers You can search for destination information such as the e-mail address and name from an LDAP (Lightweight Directory Access Protocol) server. You can register the following information. Name Item LDAP Server Address Port Number LDAP Server Login MB User Login Account ID Password Search Base MaxNumber of results Time Limit Optional Setting Additional Attribute Additional String Search Method Description This is the button name displayed on the screen. Up to 23 characters can be entered. If nothing is registered, the first 23 characters of the LDAP server address is displayed instead. Enter the name or IP address of the LDAP server to register. Up to 99 characters can be entered. Enter the port number of the LDAP server. A number between 0 and 65535 can be set, and the default value is 389. Set whether a login is required to access the LDAP server. Set MB User Login, Account ID, and Password when you set this setting to ON. Set whether to use the Message Board user information when a login is required to access the LDAP server. When this setting is enabled, if you register the LDAP server authentication account and password in the user registration of Message Board, it is not necessary to enter an account and password each time a search is performed. Register this when not using the Message Board user information when a login is required to access the LDAP server. If you do not register an account, the account will have to be entered when a search is performed. Up to 49 characters can be entered. Register this when not using the Message Board user information when a login is required to access the LDAP server. If you do not register a password, the password will have to be entered when a search is performed. Up to 29 characters can be entered. Enter the starting search position of the LDAP server. Up to 99 characters can be entered. Set how many search results to display. An error is displayed when the number of search results exceeds the maximum. A number between 1 and 100 can be set, and the default value is 50. Set the maximum amount of time until the search results are displayed. An error is displayed when the time taken for search results exceeds the maximum. A number between 0 and 9999 seconds can be set for the time, and the default value is 0 (unlimited). You can add search conditions to the parameters. Enter the search condition attribute to add. Up to 49 characters can be entered. Enter the search condition value to add. Up to 99 characters can be entered. Select the search method. 2-56 Specifying the Network Settings