Kyocera 1010N Operation Guide - Page 117
Remote, Operation Panel, Remote Operation, Panel, Paper Size
UPC - 632983001004
View all Kyocera 1010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Printed Results Faint or blurred printing Grey background. Dirt on the top edge or back of the paper Characters out of position. Print Quality Problems Corrective Action Check the EcoPrint setting. (See Chapter 1) When this setting is On, switch it to Off on the Remote Operation Panel. (See Chapter 1) Confirm the (toner) indicator. If the (toner) indicator flashes, install a new toner kit. (See Chapter 3) Clean the charger wire. Open the printer's top and front covers. Remove the process unit from the printer and slide the charger knob back and forth to clean the charger wire. (See Chapter 3) Try setting the thin paper mode. Set the paper type to Thin in the Remote Operation Panel utility. (See Chapter 1) Check the operator panel. When the (toner) indicator flashes, install a new toner kit. (See Chapter 3) Check the process unit. Open the printer's top cover and front cover, then check that the process unit is properly installed. Check the transfer roller. Open the printer's top and front covers. Remove the process unit from the printer and check whether the transfer roller is dirty. If so, print several pages to eliminate the dirt. Check the registration roller. Open the printer's top and front covers. Remove the process unit from the printer and check whether the registration roller is soiled with toner. If so, wipe it clean using the supplied wiper cloth. Check the file or program. Check whether the problem is being caused by a PRESCRIBE command error. If the problem occurs only with a specific file or program, the most likely cause is an error in a parameter to a command or command syntax. Check the paper size setting. Check that the paper size set in the paper source and the paper size set on the Remote Operation Panel are the same. (See section 1.4.4 Paper Size on page 1-20 and Chapter 5) 4-4