Kyocera 1010N Operation Guide - Page 164
C.3 Serial Interface (Option), C.3.1 RS-232C Interface, C.3.1
UPC - 632983001004
View all Kyocera 1010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Serial Interface (Option) C.3 Serial Interface (Option) Installing the optional serial interface board kit (IB-10E) in the printer enables connection to a computer with an RS-232C or RS-422A standard serial interface. C.3.1 RS-232C Interface Interface Signals The pins of the printer's RS-232C interface connector carry the signals listed in Table C.3. The table also indicates whether each signal is incoming or outgoing with respect to the printer. Table C.3 RS-232C Signal Pin Assignments Pin In/out Signal Description 1 - FG Frame ground 2 Out TXD Transmit Data 3 In RXD Receive Data 4 Out RTS Request To Send 5 In CTS Clear To Send 6 In DSR Data Set Ready 7 - SG Signal Ground 20 Out DTR Data Terminal Ready Brief descriptions of the signals follow. FG - Frame Ground - (Pin 1) This pin is connected directly to the printer frame. TXD - Transmit Data - (Pin 2) This output carries asynchronous data sent by the printer to the computer. It is used mainly in handshaking protocols. RXD - Receive Data - (Pin 3) This input carries serial asynchronous data sent by the computer to the printer. RTS - Request To Send - (Pin 4) This output is always held high (above 3 volts). CTS - Clear To Send - (Pin 5) DSR - Data Set Ready - (Pin 6) Unused. C-7