Kyocera 1010N Operation Guide - Page 157
B.4 Network Interface Card, If the serial interface board kit is installed
UPC - 632983001004
View all Kyocera 1010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Network Interface Card B.4 Network Interface Card If the serial interface board kit is installed, remove it to use the network interface card. Note Insert the option network interface card into the option interface slot at the rear of the printer. The network interface card enables the printer to be used in a network. 1 Turn off the printer and disconnect the power cord and printer cable. 2 Remove the two screws from the option interface slot cover and remove the slot cover. Option Interface Slot Cover Screws 3 Insert the network interface card and secure it with the screws removed in step 2. Network Interface Card Screws B-10
Network Interface Card
B-10
B.4
Network Interface Card
If the serial interface board kit is installed, remove it to use the network
interface card.
Insert the option network interface card into the option interface slot at the
rear of the printer. The network interface card enables the printer to be
used in a network.
1
Turn off the printer and disconnect the power cord and printer cable.
2
Remove the two screws from the option interface slot cover and
remove the slot cover.
3
Insert the network interface card and secure it with the screws
removed in step 2.
Note
Screws
Option Interface Slot Cover
Network Interface Card
Screws