Kyocera 1010N Operation Guide - Page 65
Broadcast, Value, FRPO R4
UPC - 632983001004
View all Kyocera 1010N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Other Settings Broadcast To send PRESCRIBE commands to the printer in network (TCP/IP) connection, enter the command in the Broadcast text box. The maximum length for a command sequence is 256 characters. Then click the SEND button to send the command to the printer. FRPO FRPO is a PRESCRIBE command that permanently changes the printer's internal parameters. Each parameter is represented by two letters, such as R4 for default paper source, succeeded by FRPO, then followed by a value. For example, FRPO R4, 1; means that the default paper source (R4) is the printer's cassette (1). To confirm the current value for an FRPO parameter: 1 Enter the parameter (for example R4) in FRPO. 2 Click on GET. The current value is shown in Value. To change the value for an FRPO parameter: 1 Follow the above procedure to display the current value in Value. 2 Erase the current value and enter the new value. For example, to change the default paper source to the MP Tray in the above example, enter 0 instead of 1 in Value. 3 Click SET. The value is changed. 1-54