Kyocera Ai5555 NC-2 Instruction Hand Book - Page 118
Setting Up an AIX 4.0 System
View all Kyocera Ai5555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
UNIX Printing Through TCP/IP lpd UNIX Printing Setting Up an AIX 4.0 System Use these procedures to install a NC-2 Print Server in a AIX 4.0 system: 1. Run SMIT Printer. 2. Select Print Spooling. 3. Select Add a Print Queue. 4. Select Remote. 5. Use Standard Processing. 6. Assign a queue name. 7. Use the host address of the NC-2 Print Server for the Remote System. 8. Use PORT1 for the queue on the remote system. 9. Add a description (optional). 10. Press Enter to generate. Installation is complete. Test your printer by executing the following command: lp -d 5-28 UNIX Printing Through TCP/IP
5-28 UNIX Printing Through TCP/IP
UNIX Printing Through TCP/IP
lpd UNIX Printing
Setting Up an AIX 4.0 System
Use these procedures to install a NC-2 Print Server in a AIX 4.0 system:
1. Run
SMIT Printer
.
2. Select
Print Spooling
.
3. Select
Add a Print Queue.
4. Select
Remote
.
5. Use
Standard Processing
.
6. Assign a queue name.
7. Use the host address of the NC-2 Print Server for the Remote System.
8. Use
PORT1
for the queue on the remote system.
9. Add a description (optional).
10. Press Enter to generate.
Installation is complete.
Test your printer by executing the following command:
lp -d<queue_name> <file_name>