Kyocera Ai5555 NC-2 Instruction Hand Book - Page 92
UNIX Printing Through TCP/IP
View all Kyocera Ai5555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
UNIX Printing Through TCP/IP Overview The following pages explain how to configure the Print Server and your network for use with TCP/IP communication in various environments. Independent setup and installation procedures are provided for Windows systems and for most popular UNIX systems. The Print Server TCP/IP capability will also operate with lpr spoolers on other systems, and with spooler/supervisor capabilities that communicate raw print jobs to the Print Server TCP/IP Port. This port number defaults to 10001, but may be changed to any desired number using the Network Management Utility. You can use Dynamic Host Configuration Protocol for delivering IP addresses to hosts through an IP network. Simple Network Management Protocol (SNMP) is a protocol for network management services. SNMP is supported for Management Information Base (MIB) II over IP for the print servers. This support allows you to query MIB II to get system information about the print server. Installation in a Windows Environment Several versions and variations of Microsoft Windows may be used on NetWare and/or TCP/IP networks, as well as on native Microsoft Windows network. This flexibility allows various options for setting up the network printing system even though this Print Server does not support Netbeui. • If the Windows workstations are connected to a NetWare network, configure the printer interfaces for NetWare, and use standard Windows/ NetWare utilities to provide access to the printer. • If NetWare is not to be used, the users may access the printer using TCP/ IP. This section describes installation under Windows for Workgroups, Windows 95, and Windows NT. 5-2 UNIX Printing Through TCP/IP