Kyocera Ai5555 NC-2 Instruction Hand Book - Page 35
TCP/IP, AppleTalk
View all Kyocera Ai5555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
NetWare Configuration Using the Network Management Utility Using Help Screens System Functions Unit Status TCP/IP The internet protocol (IP) and line printer daemon (LPD) settings are displayed for the print server and the printer server printer ports. IP field settings are described below. IP Address: The network address for the print server. Subnet Mask: This address identifies the number of bits used for the subnet and host portions of the address. Default Gateway Address (if needed): This address is used if the routers on your network have a default gateway address that needs to be listed for accessing the print server printers. Base Port Number: The base number assigned to the print server port. For example, port [1] would be 100001. Banner: This displays whether the banner page option is turned On or Off. The LPD settings are displayed for each print server port. This information includes the type of print jobs supported for each print server printer. For example, if PCL and PS are displayed, this means that the printer supports PCL and PS compatible print jobs. AppleTalk The print server unit name and the AppleTalk zone in which the print server resides are displayed. The name will either be the default name NC2_(serial_number) or a user-defined name. The Port Status has a default assigned printer name of Unit # (serial_number) 1. You cannot print to any printer with a disabled port status. 3-14 NetWare Configuration