Kyocera Ai5555 NC-2 Instruction Hand Book - Page 90
How To Access The HTTP Server With An IP Browser, Control Options
View all Kyocera Ai5555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
AppleTalk Configuration & Administration Program How To Access The HTTP Server With An IP Browser Access to the HTTP Server allows you to perform all print server functions. Use the following procedure to access HTTP (HyperText Transfer Protocol) with your favorite IP Browser, such as Netscape or Microsoft Internet Explorer. 1. Assign an IP address to the NC-2. (See TCP/IP Users on the previous page. 2. Start the IP Browser you normally use. When the Browser is up and running, type http:// followed by the IP address of the unit in the Location field at the top of the Browser screen, or by going to File at the menu bar and choosing Open Location. Example: For a unit with an IP address of 199.9.200.200, type: http://199.9.200.200 Control Options When you have no access to Novell NetWare, Control Options can be used to enable or disable the display of the Power-on Status Page. q When enabled, the Power-on Status Page prints after your NC-2-attached printer is turned on. The default is the ON (enable) position. q When you choose Options from the NC-2 menu, the following Control Options screen appears: Control Options Status Sheets: • Enable Powerup Display O Disable Display AppleTalk Configuration & Administration Program 4-9