Kyocera Ai5555 NC-2 Instruction Hand Book - Page 53
sysadm, NetWare Configuration Menu, Print Server Name, Accept Settings
View all Kyocera Ai5555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
NetWare Configuration Configure Using NetWare 2.15 and 3.1x Using PCONSOLE Using the MAP Utility to Verify or Edit the NC-2 Print Server Name After selecting Setup NetWare, the NetWare Configuration Menu displays (see below). 2. Check the Print Server Name field. This field should match the Print Server name you created in PCONSOLE. Edit as necessary. 3. When this is completed, edit the password and click on Accept Settings to store the new Configuration settings in the NC-2 nonvolatile memory. 4. Power down the our Printing System and then power it back up to make the new settings effective. Main Menu Enable NetWare: Print Server Name: Print Server Password: Password Retype: Preferred File Server: Preferred NDS Context: Preferred NDS Tree: Unit Serial Number 317483 x NC2_317483 Print Queue Scan Rate: Ethernet Frame Type: Auto-Sense 802.3 Ethernet II 802.2 SNAP 802.2 Disable Bindery: Enable Ports: x A password is required to perform this function. sysadm Accept Settings 3-32 NetWare Configuration