Kyocera Ai5555 NC-2 Instruction Hand Book - Page 86
Configuring the NC-2 Print Server
View all Kyocera Ai5555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
AppleTalk Configuration & Administration Program Configuring the NC-2 Print Server Use the options added to the menu bar to configure the print server. Depending on your printer, certain functions may appear grayed out, which indicates that they cannot be selected. q Use Printer Setup to configure your NC-2 for PostScript printers. q Use Reset to perform a full reset of the NC-2 unit. When you select Reset from the NC-2 menu, the NC-2 resets automatically. q Use Configuration to change the NC-2 device name, and the AppleTalk Zone name; and also view the NC-2 configuration features. You can change the NC-2 default name to another one you may prefer. Be sure to recycle the power to the NC-2 Off, then On; otherwise, the changes you made will not occur. When you choose Configuration the following screen appears: Configuration Device Type: NC-2 Serial Number: 123456 Name: NC-2 AppleTalk Zone: Engineering 1. To change the print server device name, click on the name displayed, then enter the new name. 2. To change the AppleTalk Zone, click on the zone displayed. A menu displays all available zones. 3. Select the new zone from the menu. 4. Click on OK when you have finished viewing this screen or when you are done making changes. 5. Turn off the printer and then turn it on again to make the changes take effect. The status sheet should identify the new printer name and the new zone preference. AppleTalk Configuration & Administration Program 4-5