Kyocera Ai5555 NC-2 Instruction Hand Book - Page 73
Start PCONSOLE, Select Bindery Mode
View all Kyocera Ai5555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
NetWare Configuration Configure Using NetWare 4.x Bindery Emulation Using PCONSOLE Once you confirm the server has Bindery Context, you can configure the NC-2 using the PCONSOLE procedure shown below. Use the function keys located at the bottom of the screen to configure the NC-2. Configuring NetWare 4.0x Bindery Emulation requires the following steps: 1. Start PCONSOLE. 2. Select Bindery Mode. 3. Select Quick Setup option. 4. Enter the print server, printer, and queue names. 5. Enter the printer TYPE name. 6. Add to the print server and queue lists. Note: If you encounter any errors during installation, try logging out and logging in again. Start PCONSOLE 1. Login to the network as ADMIN, type PCONSOLE, then press Enter. The screen below appears. Available Options Print Queues Printers Print Drivers Quick Setup Change Context Select Bindery Mode 2. When the Available Options menu appears, press the [F4] key for the Bindery Mode. NOTE: If you receive a message asking you to login to a server with Bindery connections, that server may not have its Bindery Mode enabled. To confirm the enabled condition, use the Confirm Bindery Context procedure; otherwise, log onto a server that you know has Bindery Services activated. 3-52 NetWare Configuration