Kyocera Ai5555 NC-2 Instruction Hand Book - Page 43
Identifies the AppleTalk Printer Name. The assigned default name is Unit
View all Kyocera Ai5555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
NetWare Configuration Using the Network Management Utility Using Help Screens Protocols Setup AppleTalk This screen lets you update or change the AppleTalk configuration settings you entered for the print server. Each field on the configuration menu is described below. Enable AppleTalk Click on the check box to enable or disable AppleTalk as a print server protocol. When the check box is marked, AppleTalk is enabled. Unit Name This is the name assigned to the print server on the AppleTalk network. By default, the name is NC2_(serial_number). You can change the name to identify the print server for your network. Zone Name Identifies the zone in which the print server is located. Be sure to identify the correct zone; otherwise, printing will not be possible. Port Type Identifies the ports available on your print server. Printer Name Identifies the AppleTalk Printer Name. The assigned default name is Unit #(serial_number) 1. Enable Port Click on the check box to enable or disable AppleTalk printing. When a check box is marked, it is enable for printing. Click on [Accept Settings] when you are finished making your entries. This puts your new entries into effect. Click on [Clear Inputs] to clear the entries you made or to revert to the previous settings. 3-22 NetWare Configuration