Kyocera Ai5555 NC-2 Instruction Hand Book - Page 54
Setting Up Notify Options for NC-2 Printers - Optional
View all Kyocera Ai5555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
NetWare Configuration Configure Using NetWare 2.15 and 3.1x Using PCONSOLE Setting Up Notify Options for NC-2 Printer(s) - Optional The NC-2 supports enhanced Notify feature for printers, which notifies users or user groups of problems occurring with a NC-2 print job, such as when the printer is off-line, jammed, open, out of paper, in need of a reset, low on toner; or when it requires manual paper feed. Notify also informs users of a wrong form loaded in the printer, and when there is a memory error, engine failure, or a higher priority print job from another source. 1. Choose Notify List for Printer on the Print Server Configuration menu. 2. Select a printer from the Defined Printers list. The notification screen appears (which should be blank for the initial installation). 3. Press [INS] to view a list of Notify Candidates. NC-2 4. Select the user or group from the Notify Candidate list. 5. Set the first and next intervals in the Notify Intervals screen. (It is recommended that you use the default settings.) The first and next intervals determine how many seconds the network will wait before it notifies candidates about a print job problem. The intervals specify how often, after the first notification, candidates will be notified. Type in the number in seconds only for each interval, then press Enter. 6. Press [Esc] to exit the program. 7. Select YES when prompted to save changes. You may exit the PCONSOLE function or make changes to your NC-2 configuration. NetWare Configuration 3-33