Kyocera KM-3050 3050/4050/5050 Operation Guide Rev-3 (Advanced) - Page 117
Serial Interface
View all Kyocera KM-3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Serial Interface Printer The serial interface can be mounted as an option. The table below shows the available settings. Select the setting best suited to the computer's serial interface. *: Default setting Item Value Baud Rate 1,200 bps, 2,400 bps, 4,800 bps, 9,600 bps*, 19,200 bps, 38,400 bps, 57,600 bps, 115,200 bps Data Bits 7 bits, 8 bits* Stop Bits 1 bit*, 2 bits Parity None*, Odd, Even, Ignore Protocol DTR (positive), &XOn/XOff*, DTR (positive), DTR (negative), XOn/XOff, ETX/ACK Use the procedure below to select the interface. 1 Press the System Menu Key. 2 Press [System] > [Serial] > [Change]. 3 Select the baud rate. System - Baud Rate Set Baud rate for the serial interface. 1200bps 38400bps 2400bps 57600bps 4800bps 115200bps 9600bps 19200bps Status 4 Press [OK]. Cancel OK 10/5/2006 10:10 5 In the same way as Steps 2 to 4, set the data bits, stop bits, parity and protocol. 6 Press the Power key, and after confirming that the Power key/indicator and memory indicator have turned off, turn the main power off and on. ADVANCED OPERATION GUIDE 3-3