Kyocera KM-3050 3050/4050/5050 Operation Guide Rev-3 (Advanced) - Page 294

Security Changing Security Functions Changing Security Password Enter the security password to change security functions. You can customize the security password so that only the administrator can use the security kit. Use the procedure below to change the security password. 1 Press the System Menu key. 2 Press [T] and then [Security]. 3 If user login is disabled, the user authentication screen appears. Enter your login user name and password and then press [Login]. For this, you need to log in with administrator privileges. The default login user name and password are both "5050". 4 Enter the default security password, 000000. 5 Press [Change] of Security Password. 6 Press [Password] to Security - Security Password enter a new security password 6 to 16 Set password. Please enter new password, then re-enter it to confirm. alphanumeric characters. Password Confirm Password Status Cancel OK 10/5/2006 10:10 CAUTION: Avoid any easy-to-guess numbers for the security password (e.g. 11111111 or 12345678). 7 Press [Confirm Password] to enter the same password again. 8 Press [OK]. Changing the Method for Overwriting the Entire Hard Disk Change the method for overwriting the entire hard disk. Refer to Overwrite Methods on page 8-2 for details. NOTE: The overwrite methods are used both for overwriting and system initialization (page 8-8), and cannot therefore be set individually. 8-6 ADVANCED OPERATION GUIDE