Kyocera KM-3050 3050/4050/5050 Operation Guide Rev-3 (Advanced) - Page 97
Scan Density, Sending Functions, ADVANCED OPERATION GUIDE, Lighter, Darker
View all Kyocera KM-3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Scan Density Sending Functions Use the procedure below to adjust the scanning density when sending scanned originals. You can adjust the scan density either automatically or manually. The table below shows the available settings. Item Manual density adjustment Auto density adjustment Detail Can set density using 7 or 13 levels. Can set the optimal scan density according to the density of original. The procedure for adjusting the scanning density when sending a scanned image is explained below. 1 Place the originals on the platen. 2 Press the Send key. 3 Press [Color/Image] and then [Density]. 4 When selecting manual density Ready to send. Enter Destination. adjustment, press [- Density 3] to [+3] (Lighter - Auto Darker) to adjust Press [OK] to display density. the image. Lighter Destination 1 Normal Darker When selecting auto density adjustment, press [Auto]. -3 -2 -1 0 +1 +2 +3 -2.5 -1.5 -0.5 +0.5 +1.5 +2.5 Status Add Shortcut Cancel OK 10/5/2006 10:10 5 Press [OK]. 6 Specify the destination, and press the Start key to start sending. ADVANCED OPERATION GUIDE 2-21