Kyocera KM-3050 3050/4050/5050 Operation Guide Rev-3 (Advanced) - Page 31
Output Destination, Destination, Description
View all Kyocera KM-3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Copying Functions Output Destination You can use the procedure below to select an output destination such as the optional document finisher for your copies. NOTE: Optional output destinations include the job separator, document finisher, 3000 Sheet Document Finisher and the mailbox. The table below shows the available output destinations. Destination Description Top tray Top tray of the machine (where copies are stored) Finisher tray* Tray of the optional document finisher or built-in finisher Tray A, Tray B*, Tray C* Tray A to C of the optional 3000 Sheet Document Finisher Job separator tray Optional job separator Trays 1 to 7* Trays 1 to 7 of the optional mailbox (Tray 1 is the top tray) * Copy output orientation can be selected either as face-up (print facing up) or face-down (print facing down). NOTE: To change default destination for copies, refer to Output Tray on page 6-20 for details. Use the procedure below to select the output destination. 1 Press the Copy key. 2 Press [Org./Paper/Finishing] and then [Output Tray]. 3 Select the output destination for finished copies. When you select any of [Finisher tray], Ready to copy. Copies 1 [Tray B], [Tray C] or Output Tray [Trays 1 to 7], select Face Up the orientation of output copy, Face Press [OK] to display the image. Face Down Up (print facing up) Top Tray Tray A Tray B Tray C or Face Down (print facing down). Job Separator Tray Tray 4 Tray 1 Tray 5 Tray 2 Tray 6 Tray 3 Tray 7 Status Add Shortcut Cancel OK 10/5/2006 10:10 ADVANCED OPERATION GUIDE 1-17