Kyocera KM-3050 3050/4050/5050 Operation Guide Rev-3 (Advanced) - Page 196
Output Tray, Descriptions
View all Kyocera KM-3050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
System Menu Output Tray Select output tray respectively for copy jobs, print jobs from Custom Box, computers, and FAX RX data. The options are as follows. Output Tray Descriptions Top Tray Delivery on Top Tray of the machine. Finisher Tray Delivery on Tray set to the optional document finisher or built-in finisher. Tray A, Tray B*, Tray C* Delivery on Tray A-C of the optional 3000 sheet document finisher. Job Separator Delivery on the optional job separator. Tray 1-7 * Delivery on Tray 1-7 (1: uppermost) of the optional Mailbox. * Select [Face Up] (print surface up) or [Face Down] (print surface down) for paper orientation at output. NOTE: Optional job separator, document finisher, 3000 sheet document finisher, and Mailbox are required. FAX RX data output can be specified when the optional fax kit is installed. Use the procedure below to select the output tray. 1 Press the System Menu key. 2 Press [Common Settings] and then [Next] of Output Tray. 3 Press [Change] of Copy/Custom Box, Printer, or FAX Port 1 or FAX Port 2. NOTE: FAX Port 1 appears when the optional fax kit is installed. If you have 2 optional fax kits installed, Fax Port 2 appears. You can specify the output tray for the second kit (Dual FAX). 6-20 ADVANCED OPERATION GUIDE